Install the external fuel filter
WARNING:
Working on fuel system.
Risk of fire! Danger of explosion!
Risk of fire! Danger of explosion!
- When working on the fuel system, make sure the workstation has sufficient ventilation, e.g., by means of extraction.
- Tightly seal off open lines and connections; collect any leakage fuel directly at the point of exit.
- No fire, sparks, open flames or smoking.
NOTE:
TECHNICAL INFORMATION
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
- Insert and install the new fuel filter (5).
- Install the holder (4) and secure it with the lock.
- Replace nuts.
Parts: Nuts
- Tighten nuts (3).
TIGHTENING TORQUES SPECIFICATION
| Fuel filter on vehicle underbody | ||
| M6 Replace nuts. |
Tightening torque | 6 Nm |
- Connect and audibly lock the fuel lines (2).
- Connect and audibly lock the fuel lines (1).
Follow-up work
- Refer to INSTALL THE UNDERSHIELD ON THE SIDES .