Install the rail pressure sensor
- Insert and install the rail pressure sensor (1).
- Tighten rail pressure sensor (1) with the special tool 0 491 318 (13 5 320).
TIGHTENING TORQUES SPECIFICATION
| Rail pressure sensor to rail | ||
| Sensor | Tightening torque | 32.5 Nm |
- Connect and lock the connector (2).
The connector (2) must engage audibly.
- Feed out lint-free cleaning rag (1) and dispose.
- Check rail pressure sensor for tightness.
Follow-up work
- Refer to INSTALL THE IGNITION COIL OF THE FIRST CYLINDER .
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
- Refer to INSTALL ACOUSTIC COVER .