Installing the throttle body
- Replace sealing ring (1).
Parts: Sealing ring
- Replace sealing ring (1).
Parts: Sealing ring
- Feed in and install the throttle body (3).
- Connect and lock the connector (2).
- Tighten screws (arrows).
TIGHTENING TORQUES SPECIFICATION
| Throttle body to intake plenum | ||
| M6X50 | Tightening torque | 7 Nm |
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| Throttle body to holder | ||
| M6X25 | Tightening torque | 8 Nm |
- Insert and install charge air line (1).
- Tighten screws (arrows).
TIGHTENING TORQUES SPECIFICATION
| Charge air line to throttle body | ||
| M6 | Tightening torque | 8 Nm |
- Connect and lock the connector (1).
- Connect and lock the connector (2).
- Secure clamps (3).
Follow-up work
- Refer to INSTALL RESONATOR .
- Refer to INSTALL ACOUSTIC COVER .