Install the boost pressure sensor on the charge air line

• Replace the sealing ring (1) for the boost pressures sensor.

  Parts:  Sealing ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the boost pressure sensor (2).
• Tighten down screw (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Boost pressure sensor at the charge air line
  TS5x20	Tightening torque	4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the wiring harness section for the engine (2).
• Ensure that the locks (1) engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and connect the engine ventilation line (3).

  The engine ventilation line (3) must engage audibly.

• Connect connectors (2) and lock.

  The connector (2) must engage audibly.

• Connect connectors (1) and lock.

  The connector (1) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING ACOUSTIC COVER .