Installing the boost pressure sensor on the intake plenum

• Check the sealing ring (1) for damage, replace it if necessary.

  Parts:  Sealing ring

• Apply a thin coat of lubricant to the sealing ring (1) of the boost pressure sensor.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert and install the boost pressure sensor (3).
• Tighten down screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1).

The connector (1) must engage audibly.

Follow-up work 

• Refer to INSTALL ACOUSTIC COVER .