Remove clean air pipe
NOTE:
DANGER
High-voltage system.
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!
High-voltage system.
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!
- All work on the high-voltage system may only be carried out by specially trained and technically experienced personnel.
- For additional information see:
- For additional information see:
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER .
- Refer to REMOVE RESONATOR .
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
- Version A:
Unfasten clamp (1).
Feed out the clean air pipe (2) and put it aside.
- Unlock and release the tank ventilation line (1).
- Unlock the locks (2).
- Feed the engine ventilation line (3) out and set it aside.
- Loosen the clamp (4).
- Release the clamp (5) on the clean air pipe (6).
- Feed out clean air pipe and remove (6).
- Version B:
- Unlock the locks (1).
- Detach the engine ventilation line (2).
- Unlock plug connection (1) and disconnect.
- Unlock and detach the line (2).
- Loosen clamp (3).
- Loosen clamp (4).
- Feed out the clean air pipe (5) upwards and put it aside.
- Unlock the clamp (1).
- Feed out the clean air pipe (2) and remove.
