Install Head Unit Basic (HU-B)

Connect and lock the connector (3) to the head unit (4).
Correctly position the cable clip (2) and engage it with the latch mechanism (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: RISK OF DAMAGE, Damage to the instrument cluster (KOMBI) or the head unit While releasing and connecting the cable, it could lead to a ground offset. This can generate currents that render the instrument cluster (KOMBI) or the head unit unusable.

While releasing: Release APIX data cable (blue) first.
While connecting: Connect APIX data cable (blue) at the last.

Courtesy of BMW OF NORTH AMERICA, INC.

Connect and lock all the connectors in the marked area with head unit (1) in the correct assembly sequence.
All cables must be routed correctly.
Push the head unit (2) into the instrument panel and tighten the screws (1).

TIGHTENING TORQUES SPECIFICATION

Head unit to instrument panel
Screw	Tightening torque	1.8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up Work

Install radio operating unit and air conditioning CONTROL PANEL .
Install the finisher on the right INSTRUMENT PANEL .
Install the right instrument panel SIDE PANEL .
Connect all battery EARTH LEADS .
Activate the 48 v ELECTRICAL SYSTEM .
ENCODE/PROGRAM control unit(s).
Install the correct NAVIGATION MAP .
Import the SERVICE HISTORY .