Installing the right tension strut on the shock tower
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Install tension strut (3) on the shock tower.
- Tighten down screw (1).TIGHTENING TORQUES SPECIFICATION
Tension strut on bulkhead M 10x25 screw Tightening torque 56 Nm - Replace the screw (2).
Parts: Screw
- Tighten down screw (2).TIGHTENING TORQUES SPECIFICATION
Tension strut to shock tower screw
Replace screws.Joining torque 56 Nm Angle of rotation 90°
