Extend auxiliary heater with holder
NOTE:
TECHNICAL INFORMATION
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Have a suitable collecting vessel ready.
Coolant emerges when coolant lines are detached.
- Catch and dispose of leakage coolant.
- Place special tool 0 491 256 (13 3 010) as shown on the coolant hose (1).
- Disconnect the coolant hose (1). Screw the nut (2) in the direction of the arrow.
- Loosen nuts (1).
- Loosen screws (1) and remove holder (2).
- Unlock and disconnect all connectors (1).
- Unlock and detach fuel line (1).
- Unlock and disconnect connector (2).
- Loosen nuts (3).
- Release the spring strap clamps (1) and detach the coolant hoses (2).
- Release the spring strap clamp (1) and detach the coolant hose (2).
- Remove auxiliary heater with holder (3).






