Fastening the spring strut and the control arm on the wheel carrier

Replace screws (1) and (2).
Parts: Screws
Position the spring strut on the wheel carrier.
NOTE: TECHNICAL INFORMATION
Tighten the screw connection in the NORMAL POSITION .

Courtesy of BMW OF NORTH AMERICA, INC.
Hand-tighten the screw (2).
The screw connection is tightened later in the normal position.
Position the control arm on the wheel carrier.
NOTE: TECHNICAL INFORMATION
Tighten the screw connection in the normal position.
Hand-tighten the screw (1).
The screw connection is tightened later in the normal position.