If installed: Fasten the active stabilizer (additional work for ARS)

Tighten down screw (1).

TIGHTENING TORQUES SPECIFICATION

Front active stabilizer cable with ground strap to holder
	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Connect connectors (1) and (2) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the bolt (1) of the wiring harness mounting on the front axle support.

TIGHTENING TORQUES SPECIFICATION

Active stabilizer connector bracket to front axle support
	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Install the cover of the steering assembly on the right

NOTE: Description is for left component only. Procedure on the right side is identical.

Install the cover of the steering assembly

NOTE: To provide a better overview: Schematic diagram with partially hidden components.

Tighten all bolts (arrows).

TIGHTENING TORQUES SPECIFICATION

Cover, steering unit
screw	Tightening torque	3 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Install the front section of the front right wheel arch cover

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing the front section of the front wheel arch cover

NOTE: To provide a better overview: Schematic diagram with partially hidden components.

Tighten screws (arrows).

TIGHTENING TORQUES SPECIFICATION

Courtesy of BMW OF NORTH AMERICA, INC.