Installing the exhaust manifold on the left and right

Install the right exhaust manifold 

• Clean sealing surfaces.
• Replace the seal (1).

  Parts:  Gasket

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the exhaust manifold (2) and the sliding rail (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  When assembling, it is essential to observe screwing sequences and tightening torques.
  Failure to comply with the regulations can lead to leaks and damage.
• Tighten the nuts in the sequence (1) to (8).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Exhaust manifold to cylinder head
  M8 Replace nuts.	tightening torque	15 Nm

  Fig 1: Exhaust Manifold Nuts Tightening Sequence

  Courtesy of BMW OF NORTH AMERICA, INC.