Installing the protective cap of the exterior mirror

Position the connector (1) on the mounting (2).
Position connector (1) as shown.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the protective cap (1) on the exterior mirror.
Feed in the connector (2) for the side repeater (3).
Push protective cap (1) on exterior mirror and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Make sure that the latch mechanisms (1) are correctly fitted.

Courtesy of BMW OF NORTH AMERICA, INC.

Check the correct seating of the protective cap (2) on retaining ring (3) around (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up Work