Removing the engine from the assembly jig
CAUTION:
Heavy component.
Heavy components can lead to injury or damage.
Heavy components can lead to injury or damage.
- Remove and install heavy components with the aid of another person/other persons.
- Stage the workshop crane 2 220 718
.
- Prepare the special tool (lifting equipment) 0 490 567 (11 0 020) .
NOTE:
TECHNICAL INFORMATION
The workshop crane, lifting gear and the mounting brackets on the engine must all be connected to each other so that the engine hangs straight upon lifting.
The workshop crane, lifting gear and the mounting brackets on the engine must all be connected to each other so that the engine hangs straight upon lifting.
- Connect both hooks of the special tool 0 490 567 (11 0 020) to the front and rear of the engine with the mounting brackets.
- Connect the workshop crane 2 220 718
to the special tool (lifting equipment) 0 490 567 (11 0 020)
.
- Slacken nuts (1).
- Unclamp the clamp jaws of the special tool (motor mount) 2 413 082
in the direction of the arrow.
- Raise the engine slowly.
- Unscrew the screws (marks) and remove the special tool 2 411 718 .
