Install tension strut on shock tower

• Version 1: 

  Install the tension strut (3) on the shock tower.

  Tighten down screws (1).

  TIGHTENING TORQUES SPECIFICATION
  
  

  Tension strut on bulkhead
  M10x25 screw	Tightening torque  56 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace screws (2).

  Parts:  Screws

• Tighten down screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Tension strut to shock tower
  screw Replace screws.	Joining torque  56 Nm Angle of rotation  90°

• Version 2: 

  Install tension strut (3) on the shock tower.

  Tighten down screw (1).

  TIGHTENING TORQUES SPECIFICATION
  
  

  Tension strut on bulkhead
  M10x25 screw	Tightening torque  56 Nm

• Replace the screw (2).

  Parts:  Screw

• Tighten down screw (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Repair thread on the spring bolt 

• Repair the damaged thread with a Helicoil thread insert.