Install the coolant return line for the exhaust turbocharger

NOTE: TECHNICAL INFORMATION
Make sure that the connections are locked correctly. The locks must engage audibly.

Replace O-rings (1) on coolant return line (2) with special tool 0 496 714 (00 9 030) .
Parts: O-rings

Courtesy of BMW OF NORTH AMERICA, INC.
Replace O-ring (1) on coolant feed line (2) with special tool 0 496 714 (00 9 030) .
Parts: O-ring

Courtesy of BMW OF NORTH AMERICA, INC.
Insert and position the coolant return line (1) for the exhaust turbocharger.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect the coolant return line (1) for the exhaust turbocharger and lock.
Make sure that the coolant return line (1) for the exhaust turbocharger engages audibly.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert and install the coolant return line (4) for the exhaust turbocharger.
Insert and install the coolant feed line (2) for the exhaust turbocharger.

Tighten down screw (1).

TIGHTENING TORQUES SPECIFICATION

Coolant feed line/coolant return line to exhaust turbocharger
M6 x 12	Tightening torque 8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

Coolant return line holder to exhaust turbocharger
M6	Tightening torque 8 Nm