Install the reinforcement strut on the right engine mount

NOTE: Only perform the operation on the right side.

• Position the reinforcement strut (1).
• Screw in the screw (2) by hand force.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screw (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Engine mount reinforcement strut on body
  M8	tightening torque  28 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screw (2) at the reinforcement strut (1).

TIGHTENING TORQUES SPECIFICATION

Engine mount reinforcement strut on front subframe
M8	tightening torque  28 Nm

Courtesy of BMW OF NORTH AMERICA, INC.