Install the rear section of the coolant return line (front section removed)

• Insert the rear section of the coolant return line (1) and route it correctly.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: The figure shows the rear of the engine.
• Tighten down screw (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Coolant return line to cylinder head
  M6 x 12	Tightening torque  8 Nm

• Attach the coolant return line in this area (2).

Courtesy of BMW OF NORTH AMERICA, INC.