Install rear underbody protection
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Version A:
Insert the rear underbody protection (1).
Tighten screws (arrows).
TIGHTENING TORQUES SPECIFICATIONUndershield screw Tightening torque
2.6 NmPlastic nut Tightening torque
2.6 Nm - Version B:
Feed in rear underbody protection (1) and install.
Tighten screws (arrows).
TIGHTENING TORQUES SPECIFICATIONUndershield screw Tightening torque
2.6 NmPlastic nut Tightening torque
2.6 Nm - Version C:
Feed in rear underbody protection (1) and install.
Tighten screws (arrows).
TIGHTENING TORQUES SPECIFICATION
| Undershield | |
| screw | Tightening torque 2.6 Nm |
| Plastic nut | Tightening torque 2.6 Nm |
