Install sliding blocks of bank 1

Position the special tool 2 249 166 on the intake camshaft (1) in the sliding block (2) area.
Remove the oil and dirt from the sliding block (3).
Position the sliding block (3) and abut with the screw (1).
Preload the sliding block (3) with the special tool 2 249 166 (2) in direction of arrow.

Tighten down screw (1).

TIGHTENING TORQUES SPECIFICATION

Sliding block on cylinder head
Screw M7x35 10.9	Tightening torque 20.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Relieve the special tool 2 249 166 (1) and feed it out of the camshaft (2) and place aside.
Repeat the step for all the gates.

Courtesy of BMW OF NORTH AMERICA, INC.