Removing the anti-roll bar

Loosening the anti-roll bar link on the left and right from the anti-roll bar 

Loosening the anti-roll bar link from the anti-roll bar 

• Loosen nut (1).
  NOTE: Counter-hold at the Torx socket.
• Loosen the anti-roll bar link (3) from the anti-roll bar (2).

Courtesy of BMW OF NORTH AMERICA, INC.

If installed: Removing the anti-roll bar 

• Loosen screws (1).
• Remove anti-roll bar (2).

Courtesy of BMW OF NORTH AMERICA, INC.

If installed: Remove the active stabilizer in front 

• Release the screw (1) the right of the front axle support.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Disconnect plug connection (1) and (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Set the connector with the holder aside.
• Loosen screw (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).
• Remove the active stabilizer.

Courtesy of BMW OF NORTH AMERICA, INC.