If installed: Loosen active stabilizer (additional work for ARS)

Remove the cover for the steering assembly on the right

NOTE: Description is for left component only. Procedure on the right side is identical.

Remove the cover of the steering assembly

NOTE: To provide a better overview: Schematic diagram with partially hidden components.

Courtesy of BMW OF NORTH AMERICA, INC.

Remove the front right wheel arch cover front section

NOTE: Description is for left component only. Procedure on the right side is identical.

Remove the front section of the front wheel arch cover

NOTE: To provide a better overview: Schematic diagram with partially hidden components.

Courtesy of BMW OF NORTH AMERICA, INC.

Remove the active stabilizer from the front axle support

Disconnect plug connection (1) and (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Unscrew the bolt (1) on the front axle support and slide the wiring harness mounting to the side.

Courtesy of BMW OF NORTH AMERICA, INC.
Unscrew the bolt (1) and guide the wiring harness with the holder out.

Courtesy of BMW OF NORTH AMERICA, INC.
Unscrew the bolts (1) from stabilizer mount and remove the active stabilizer from the front axle support.

Courtesy of BMW OF NORTH AMERICA, INC.