For equipment with external radiator or stationary heating system: Install bumper cover, front
Install bumper cover, front
NOTE:
Schematic diagram is for example purposes. Some parts may differ in certain details.
- Install the bumper cover (1).
- Engage the bumper cover (1) in the area of the upper active air-flap control (2) in the mountings.
- Connect connector (1) on the right side and lock it.
- Attach plug connection (1) in holder (2).
- Connect the hose for the headlight cleaning system.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Bumper cover on side wall | ||
| Screw | Tightening torque | 3 Nm |
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Underbody protection | ||
| Screw | Tightening torque | 3 Nm |
