Installing the rear seat and the rear seat backrest (not for the SA465 pass-through system)

Remove rear seat backrest 

• Insert the rear seat backrest (2) and place the seat belt around the rear seat backrest (2).
• Hook the rear seat backrest (2) into the guides (3) from above.
• Replace screws (1).

  Parts:  Screws

• Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Installing the rear seat bench 

• Place the rear seat and while doing so feed in the lower straps (3).
• Connect the connector in the areas (2) and lock it.
• Clip the rear seat in the areas (1) into the detents downwards.

Courtesy of BMW OF NORTH AMERICA, INC.