Installing the acoustic cover for the oil pan
- Insert and position the acoustic cover (1) of the oil pan.
- Secure expanding rivet (1).
- Replace the fir tree clip (2).
Parts: Fir tree clip
- Secure the fir tree clip (2).
- Fasten the expanding rivet (1) and (2).
- Secure expanding rivet (1).
- Feed in and install the wiring harness section (2) for the automatic transmission.
- Secure clamps (1).
- Connect connectors (1) and lock.
The connector (1) must engage audibly.
- Secure the clamp (2).
- Insert and install the positive battery cable (4).
- Hand-tighten the nut (3).
CAUTION:
Improper routing of the positive battery cable.
Risk of short circuits!
Risk of short circuits!
- Route the positive battery cable without abrasions and do not trap.
- Attach the positive battery cable (1) correctly to anti-twist lock (2).
- Tighten nut (3).
TIGHTENING TORQUE SPECIFICATIONS
| Battery positive lead to starter | ||
| M8 | Tightening torque | 13.5 Nm |






