Installing the actuator on the right hood hinge

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

• Feed in the actuator (1) at the guide pin (2) and slide to the back in arrow direction up to the stop.
• Replace the screw (3).

  Parts:  Screw

• Tighten down screw (3).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Actuator to engine compartment lid hinge
M6x12 Replace screw.	Tightening torque	8 Nm

• Connect connectors (4) and lock.