Removing the cylinder head cover (engine removed)
- Unlock both plug connections (1) and disconnect.
- Unlock and pull off the engine ventilation line (2).
- Detach the engine wiring harness (3) in the highlighted area.
- Loosen both oxygen sensor connectors (1) from the carrier plate.
- Release screw (2) and keep the carrier plate aside.
- Detach the cables in the marked areas.
- Detach the engine wiring harness (3) in the highlighted area.
- Release screw (4) and keep the fuel supply line aside.
- Release the screws in the order from (15) to (1).
- Remove cylinder head cover.
