Install front pads (high brake)

• Remove the protective film of the adhesive layer (1) at the brake pads.

  The adhesive layer (1) must not be taped.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert brake pads into the brake caliper.

  The adhesive layer must not tap the brake piston.

• Position the retaining clip (1).
• Drive in locking pins (2) in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Install the front brake pad WEAR SENSOR .
• Install the front left and right WHEELS .
• Commission or bed in (break-in) new BRAKE PADS and discs (high brake).
• Perform the CBS RESET .