Check front brake discs
Check
- Check surface and thickness of brake discs.
Result
» Brake disc thickness has fallen below the minimum.
Scoring, heat cracks or thickness differences are present.
Measure
- Replace brake discs.
See: 34 11 220 removing both FRONT BRAKE DISCS and installing/replacing (17-inch high equipment and 18-inch brake)
Measure minimum brake disc thickness (front brake)
- Check minimum brake disc thickness:
Place the special tool 0 495 451 (34 1 280) at three measuring points in area (1) and measure.
Compare measurement result and lowest value with setpoint value.
New brake pads must only be installed if the brake disk thickness is greater than the minimum brake disc thickness.
TECHNICAL DATA - BRAKE DISC THICKNESS SPECIFICATION
| Minimum brake disc thickness MIN TH (nominal dimension 348x30) | ||
|---|---|---|
| Minimum brake disc thickness MIN TH (brake disc 348x30) | 28.4 mm | |
TECHNICAL DATA - BRAKE DISC THICKNESS SPECIFICATION
| Minimum brake disc thickness MIN TH (nominal dimension 348x36) | ||
|---|---|---|
| Minimum brake disc thickness MIN TH (brake disc 348x36) | 34.4 mm | |
TECHNICAL DATA - BRAKE DISC THICKNESS SPECIFICATION
| Minimum brake disc thickness MIN TH (nominal dimension 330x24) | ||
|---|---|---|
| Minimum brake disc thickness MIN TH (brake disc 330x24) | 22.4 mm | |