If reusing: Removing the adhesive bead
- Clean the windscreen in the area of the adhesive bead (1).EXPENDABLE MATERIALS - CLEANING AGENT DESCRIPTION
Cleaning agent R2 500 ml 83190417324 - Allow to dry after cleaning.
TECHNICAL DATA - AIR DRYING TIME SPECIFICATION
| Air drying time after cleaning | |
|---|---|
| Window glass or painted panel without residual adhesive bead | 5 min |
| Body with adhesive bead | 15 min |
- First remove the adhesive bead (1) on the rear window just before bonding using the standard tool (2).
Standard tool:
Pinchweld scraper set
Pinchweld scraper set
81 62 0 410 436
NOTE:
TECHNICAL INFORMATION
Do not touch the adhesive bead after cutting or bring cleaning agents in contact with it.
Do not touch the adhesive bead after cutting or bring cleaning agents in contact with it.
- Use pinchweld scraper (2) as shown.
- Cut back the adhesive bead (1) on the rear window (3).
TECHNICAL DATA - HEIGHT SPECIFICATION
| Residual height of the adhesive bead |
|---|
| max. 1 mm |