Install venting unit

WARNING: High-voltage system.
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!

All work on the high-voltage system may only be carried out by specially trained and technically experienced personnel.
For additional information see: 61 00... SAFETY INSTRUCTIONS on handling hybrid cars
For additional information see: 61 25... Notes on REPAIR of high-voltage battery unit

Preliminary work

Prepare the POSITION PLAN
CHECK the lower housing section contamination and foreign bodies.

Check contact surface degassing unit (1) for contamination and clean if required.
Insert venting unit (1) in arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (1).

TIGHTENING TORQUES SPECIFICATION

Degassing unit on lower housing
M5x10	Tightening torque	4.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.