Removing vibration actuator for the lane departure warning
WARNING:
Pyrotechnic components.
Danger! Life-threatening injuries!
Danger! Life-threatening injuries!
- All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
- Replace any damaged part or ones that have been dropped.
- For additional information see: 72 00 SAFETY REGULATIONS on handling components with gas generators.
NOTE:
TECHNICAL INFORMATION
A wheel alignment is not necessary after the removal, installation or replacement.
A wheel alignment is not necessary after the removal, installation or replacement.
Preliminary works
- Deactivate the 48 v ELECTRICAL SYSTEM .
- Disconnect all battery EARTH LEADS .
- Remove the steering wheel or sports steering wheel AIRBAG UNIT .
- Remove the leather sports steering wheel DECORATIVE TRIM (SA255).
- Pull the control unit (1) out of the steering wheel.
- Unlock and disconnect plug connection (1) on the control unit (2).
- Pull the control unit (1) out of the steering wheel.
- Unlock and disconnect plug connection (1) on the control unit (2).
- Feed out associated access line.
- Fold open foam material (1).
- Loosen screws (2),
- Remove vibration actuator (3) from the steering wheel.
