Install brake light switch

• Clip the holder for the brake light switch (3) into the brake pedal.
• Press brake pedal.
• Push the brake light switch (2) in the opposite direction to the arrow into the holder for the brake light switch (3) up to the limit position.
• Counter support the holder for the brake light switch (3) and move back the brake pedal slowly to the initial position at the same time.
• Slowly pull brake pedal back to limit position.
• Connect connector (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up Work 

• Install the pedal mechanism TRIM PANEL .