Installing the front upper seat belt

• Feed in the foam part (3) and position correctly.
• Feed in the belt retractor (4) and position correctly.
• Connect connectors (2) and lock,
• Replace the screw (1),

  Parts:  Screw

• Tighten down screw (1),

Courtesy of BMW OF NORTH AMERICA, INC.

• Position seat belt (3) correctly,
• Position the slide bar (2) correctly
• Tighten the screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Position the seat belt guide loop (2) correctly.
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up Work 

• Install the lower b-pillar trim PANEL .
• Install upper b-pillar trim PANEL .
• Install the rear door sill COVER STRIP .
• Install the front door sill COVER STRIP .
• Connect all battery EARTH LEADS .
• Activate the 48 v ELECTRICAL SYSTEM .
• Encode/program CONTROL UNIT(S)