Install the rear center upper seat belt
NOTE:
TECHNICAL INFORMATION
Component is encoded against incorrect assembly.
Component is encoded against incorrect assembly.
- Insert inertia reel (2).
- Replace the screw (1).
Parts: Screw
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| Rear inertia reel to body | |
| Tightening torque | |
| M10 Replace screw. | 42 Nm |
Follow-up Work
- Install the storage shelf TRIM PANEL .
- Install rear SEAT and rear seat backrest (not in case of sA465 through-loading system)
- Install the left and right backrest SIDE SECTION .
- Install both c-pillar TRIM PANELS .
- Connect all battery EARTH LEADS .
- Activate the 48 v ELECTRICAL SYSTEM .