Mount head airbag

• Insert the folding pack (3)  with the gas generator.
• Tighten down screws (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connector (1)  .
• Insert the clamps (1)  .
• Make sure that the clamps (1)  are correctly fitted in the body.
• Tighten down screw (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the clamps (1)  .
• Make sure that the clamps (1)  are correctly fitted in the body.

Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the clamps (2)  .
• Make sure that the clamps (2)  are correctly fitted in the body,
• Tighten down screw (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up Work 

• Connect all BATTERY EARTH LEADS .
• Fit the roof LINING .
• Install all GRAB HANDLES
• Install both c-pillar TRIM PANELS .
• Partially install top left and right b-pillar TRIM PANELS
• Install rear interior roof LIGHT .
• Install the interior mirror COVERS .
• Install roof FUNCTION CENTER (FZD).
• Install the left and right SUN VISORS
• Install both vanity mirror LIGHTS .
• Install left and right sun visor COUNTER SUPPORTS .
• Install the right hands-free MICROPHONE .
• Install left hands-free MICROPHONE .
• Install the left and right a-pillar TRIM PANEL .
• Activate the 48 v ELECTRICAL SYSTEM .