Install steering column shroud lower section
- Remove the rubber plugs (1) from the steering column shroud lower section.
- Clip in the gap cover (1) into the steering column shroud lower section (2) (arrows).
- Secure the wire (1) to the holder (2).
- Insert the line (1) at the guide (3).
- Connect the connectors (1) and (2).NOTE: Perform the steps on the right and left side.
- Align the steering column shroud lower section (3) to the steering column using the retaining lug (2).
- Push the steering column shroud lower section (3) upwards in arrow direction until the lug (1) locks with the retaining lug (2).
Follow-up work
- Fit steering upper section column SHROUD .




