Secure the spring strut to the bottom wishbone
- Position the spring strut on the bottom of the wishbone.
- Replace the bolt (2)
and the nut (1)
.
Parts: Bolt, nut
- Insert the screw (2) .
- Tighten nut (1) .
TIGHTENING TORQUES SPECIFICATION
| Lower wishbone to spring strut clevis | ||
| M14 Replace screw and nut. Tighten in NORMAL POSITION . |
Joining torque | 165 Nm |
| Angle of rotation | 90° | |
Follow-up work
- Attach the spring strut ANTI-ROLL BAR LINK .
- Fasten the wishbone (top) SWIVEL BEARING
- Install the top attachment SWIVEL BEARING
- Install front left or right WHEEL .
- Install the rear left or right engine compartment COVER .