Securing the anti-roll bar link on the left and right to the anti-roll bar
NOTE:
Perform the steps on the right and left side.
Securing the anti-roll bar link to the anti-roll bar
- Position the anti-roll bar link (3) on the anti-roll bar (2).
- Replace nut (1).
Parts: Nut
- Tighten nut (1).NOTE: Counter-hold at the Torx socket.
TIGHTENING TORQUES SPECIFICATION
| Anti-roll bar link to anti-roll bar | ||
| M12 Replace nut. |
Tightening torque | 100 Nm |
Follow-up work
- Install the right steering assembly COVER .
- Install front STIFFENING PLATE .
- Install the front thrust field front UNDERBODY PROTECTION .
- Install the front right WHEEL .
- For replacement: PROGRAMING/CODING the active stabilizer.