Install the A-pillar trim panel
WARNING:
Airbag unit.
Danger! Life-threatening injuries!
Danger! Life-threatening injuries!
- Before performing any work on the airbag, always disconnect the battery earth lead from the battery.
- Airbag unit may only be set down with the cushion (airbag itself) facing upwards.
- For additional information see: 72 00... SAFETY REGULATIONS on handling airbag system components/gas generators
WARNING:
Pyrotechnic components.
Danger! Life-threatening injuries!
Danger! Life-threatening injuries!
- All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
- Replace any damaged part or ones that have been dropped.
- For additional information see: 72 00 SAFETY REGULATIONS on handling components with gas generators.
- Thread in the A-pillar trim panel (2) and clip it in at the clips (3).
- Tighten down screw.
TIGHTENING TORQUES SPECIFICATION
| Body pillar trim | ||
|---|---|---|
| Screw | Tightening torque | 2.5 Nm |
- Clip in the cover (1).
