Determine installed variant of the wishbone
Preliminary work
- Refer to REMOVING THE FRONT LEFT WHEEL .
- Refer to REMOVING THE COVER OF THE ENGINE COMPARTMENT AT THE REAR LEFT .
- Refer to DETACHING THE SPRING STRUT IN FRONT .
- Determine by visual inspection of installed wishbone from available or not available +/- identification, besides the end cover of the ball pivot to shoring variant of the new wishbone.
Wishbones with + or - marking (see illustration) are camber correction arms:
An unmarked wishbone is a standard part.
- Block same variant of wishbone (standard part, under-size or oversize variant) again.
