Remove top wishbone

Release the nut (1) of the front screw connection above at the upper wishbone on shock tower in the engine compartment.

Courtesy of BMW OF NORTH AMERICA, INC.

Support swivel bearing
Secure special tool 2 358 630 to drive flange with lug bolts.
Support the swivel bearing using the special tool 2 358 630 and the universal jack.

Courtesy of BMW OF NORTH AMERICA, INC.
Release nut (1).
Pull out screw (2).
Release upper wishbone (3) from the swivel bearing (4).
(F) = driving direction

Courtesy of BMW OF NORTH AMERICA, INC.
Undo nut (1) of the ride height sensor on the upper wishbone.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screw (3).
Pull the spring strut outwards slightly until the screws (2) and (3) can be pulled out.
Pull out screws (2) and (3).
Remove top wishbone (1).

Courtesy of BMW OF NORTH AMERICA, INC.