Secure the spring strut to the bottom wishbone
- Position the spring strut on the bottom of the wishbone.
- Replace the bolt (2) and the nut (1).
Parts: Bolt, nut
- Insert the screw (2).
- Tighten nut (1).
TIGHTENING TORQUES SPECIFICATION
| Lower wishbone to spring strut clevis | |
|---|---|
| M14 Replace screw and nut. Tighten in NORMAL POSITION . |
Joining torque 165 Nm Angle of rotation 90° |
Follow-up works
- Refer to ATTACHING THE ANTI-ROLL BAR LINK TO THE SPRING STRUT .
- Refer to FASTENING THE TOP OF THE WISHBONE TO THE SWIVEL BEARING .
- Refer to REMOVING THE TOP SWIVEL BEARING ATTACHMENT .
- Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT THE REAR LEFT OR RIGHT .
- Refer to INSTALLING FRONT LEFT OR RIGHT WHEEL .