Remove the spring strut support bearing
WARNING:
Spring preload.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- Secure the coil spring with special tool 2 213 022 (31 3 340).
- Use special tool as per Owner's Manual and always observe the safety instructions.
Preliminary work
- Refer to REMOVING THE COVER IN THE ENGINE COMPARTMENT ON THE REAR LEFT OR RIGHT .
- Refer to REMOVING FRONT LEFT OR RIGHT WHEEL .
- Refer to DETACHING THE UPPER WISHBONE FROM THE SWIVEL BEARING .
- Refer to SECURING THE SWIVEL BEARING .
- Refer to DETACHING THE ANTI-ROLL BAR LINK FROM THE SPRING STRUT .
- Refer to DETACHING THE SPRING STRUT IN FRONT .
- Refer to DETACHING THE SPRING STRUT FROM THE WISHBONE ON THE BOTTOM .
- Refer to REMOVING FRONT SPRING STRUT.
- Refer to PREPARING THE SPRING TENSIONER .
- Refer to TENSIONING THE COIL SPRING .
NOTE:
TECHNICAL INFORMATION
Releasing and tightening the nut on the support bearing or spring strut support bearing with an impact screwdriver is prohibited.
Releasing and tightening the nut on the support bearing or spring strut support bearing with an impact screwdriver is prohibited.
- Release nut with special tool 0 496 514 (33 0 040) .
- Remove the spring strut support bearing (1) with the spring pad.
