Securing the anti-roll bar link on the left and right to the anti-roll bar

Securing the anti-roll bar link to the anti-roll bar 

• Position the anti-roll bar link (3) on the anti-roll bar (2).
• Replace nut (1).

  Parts:  Nut

• Tighten nut (1).
  NOTE: Counter-hold at the Torx socket.

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUES SPECIFICATION
  
  

  Anti-roll bar link to anti-roll bar
  M12 Replace nut.	tightening torque  100 Nm

Follow-up work 

• Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
• Refer to INSTALLING THE FRONT UNDERBODY PROTECTION OR FRONT THRUST FIELD .