Removing controller drive indirect ventilation
- Unlock and disconnect connector (1)
.
- Unlock latch mechanisms (1)
and push air ducts (2)
down.
- Loosen air duct (1)
at mountings (2)
.
- Loosen air duct (1)
at mountings (2)
.
- Loosen the cable clip (1) .
- Loosen adhesive tape (2) .
- Loosen screws (3)
and remove air duct (4)
from instrument panel.
- Disengage air duct (1) from instrument panel (2) .
