Installing transmission cross member
- Install transmission cross-member.
- Replace the screw (1).
Parts: Screw
- Tighten down screw (1).TIGHTENING TORQUES SPECIFICATION
Transmission cross member to rubber mounts M12 Tightening torque 100 Nm - Replace screws (2).
Parts: Screws
- Tighten down screws (2).TIGHTENING TORQUES SPECIFICATION
Transmission cross member to body M8 Tightening torque 19 Nm - Remove the transmission jack.
Follow-up work
- Refer to INSTALL REAR UNDERBODY PROTECTION .
