Install tension strut on shock tower
NOTE:
TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.
Driving without the strut brace/front-end strut or tension strut is not permitted.
- Version 1:
Install the tension strut (3) on the shock tower.
Tighten down screws (1).
TIGHTENING TORQUES SPECIFICATIONTension strut on firewall M10x25 screw Tightening torque 56 Nm - Replace screws (2).
Parts: Screws
- Tighten down screws (2).TIGHTENING TORQUES SPECIFICATION
Tension strut to shock tower Screw
Replace screws.Joining torque 56 Nm Angle of rotation 90° - Version 2:
Install tension strut (3) on the shock tower.
Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATIONTension strut on firewall M10x25 screw Tightening torque 56 Nm - Replace the screw (2).
Parts: Screw
- Tighten down screw (2).TIGHTENING TORQUES SPECIFICATION
Tension strut to shock tower Screw
Replace screws.Joining torque 56 Nm Angle of rotation 90° - Repair thread on the spring bolt
- Repair the damaged thread with a Helicoil thread insert.
CONSUMABLE - HELICOIL THREAD DESCRIPTION
| Helicoil thread insert | M10x25 mm 33 30 6 782 756 |
Follow-up work
- Install windshield PANEL COVER .
- Install left and right WIPER ARM .
- Install the rear right engine compartment COVER .
- Install the rear left engine compartment COVER .