Install ignition coil

• Install ignition coil (3).
• Tighten down screw (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUES SPECIFICATION
  
  

  Ignition coil
  screw	Tightening torque	8 Nm

• Connect connectors (1) and lock.

  The connector (1) must engage audibly.

• Mount the connector (1) of the Lambda oxygen sensor and the oxygen sensor monitor on the cable duct (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to WHEN WORKING ON THE LAST CYLINDER: MOUNTING THE SERVICE OPENING IN THE SOUND INSULATION ON TOP OF THE ENGINE .
• Refer to INSTALLING ACOUSTIC COVER .