Installing the crankshaft sensor

• Guide in and install crankshaft sensor (2) and install.
• Tighten down screw (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Crankshaft sensor to crankcase
  TS5x20	tightening torque	6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

  The connector (1) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• With automatic transmission:

  Insert and install the holder (2).

  Make sure that the bracket (2) is correctly installed in the guide (3).

  Position the transmission oil line 4 on the bracket 2.

  Secure clamps (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• With automatic transmission:
• Tighten down screw (3).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Holder on end cover
  M6X16	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in and position holder (2).
• Replace the screw (1).
• Tighten down screw (1).

Follow-up work 

• Refer to INSTALLING THE THRUST FIELD .
• Refer to INSTALLING THE UNDERBODY PROTECTION OF THE STEERING GEAR OR THE FRONT THRUST FIELD .
• Refer to INSTALLING THE FRONT UNDERBODY PROTECTION OR FRONT THRUST FIELD .